|
|
 ATL L200 Specifications Capacity2 (TB) | VS80 | DLT 7000 | DLT 8000 | SDLT | 8 slots
(1 P6000) | 640GB | 560GB | 640GB | 1.76TB | Performance2 (GB/hour) | | | | | | 1 drive | 21.6 | 36.0 | 43.2 | 79.2 | Robotics Reliability | | | | MTBF | 200,000 power-on hours | | MSBF | 500,000 mean swaps | | MTTR | Less than 30 minutes | | Warranty | Three year, rapid exchange | Communication Interfaces | | Host to Library | | Electrical | Single-ended or Differential SCSI-2 Fast Narrow or Wide
High-density 68-pin Micro D female connector | | Software | SCSI-2 medium changer command set | | Host to Tape Drives | | Electrical | Single-ended or Differential
DLT8000 and Super DLTtape: High-Voltage Differential
(HVD) or Low-Voltage Differential (LVD) | Recording Medium | DLTtape IV, 0.5 in., Metal Particle 2 (MP2), 1,800 Oe, 0.3 ml Thick
Super DLTtape I, 0.5 inch., advanced metal powder (AMP), 1900 Oe, 0.3 ML thick | Power Specifications | | Voltage | 100-120 / 200-240 VAC | | Frequency | 50 / 60 Hz | | Power Consumption | 100 to 192 watts (typical) | Environmental, operating | | Humidity | 20% to 80%, noncondensing | | Temperature | 50°F to 104°F (10°C to 40°C) | | Altitude | -500 to 30,000 feet (-152.4 to 9,144m) | Environmental, non-operating (storage & shipping) | | Humidity | 10% to 95%, noncondensing | | Temperature | -40°F to 15°F (-40°C to 66°C) | Cabinet Characteristics | | Height | Rack: 6.9 in. (17.5cm)
Desktop: 7.6 in. (19.4cm) | | Width | Rack: 8.6 in. (21.9cm)
Desktop: 8.9 in. (22.5cm) | | Depth | Rack: 22.8 in. (57.8cm)
Desktop: 22.8 in. (57.8cm) | | Weight | Rack: 32 lbs. (14.5kg)
Desktop: 37 lbs. (16.8kg) | Agency Approvals | | Safety | UL1950 Listed, CSA, C22.2-No. 220 TUV-EN60950 | | Emission | FCC Part 15B Class A & B, CE Mark Class A & B, VCCI Class 1 & 2, EN550221B, EN550821B, CISPR 22 A & B |
2. Assumes 2:1 data compression that may vary by data type and other variables. |
ICQ 687089651
