|
ATL L500 Specifications Communication Interfaces | Host to Library | Electrical | Single-ended or Differential SCSI-2 Fast Narrow or Wide High-density 68-pin Micro D female connector | Software | SCSI-2 medium changer command set | Host to Tape Drives | Electrical | VS80: Low-voltage Differential SCSI-2 Fast and Wide High-density 68-pin Micro D female connector DLT7000: Single-ended or Differential SCSI-2 Fast and Wide High-density 68-pin Micro D female connector DLT8000: High-Voltage Differential (HVD) SCSI-2 Fast and Wide High-density 68-pin Micro D female connector | Recording Medium | DLTtape IV, 0.5 in., Metal Particle 2 (MP2), 1,800 Oe, 0.3 ml Thick | Capacity (TB) | VS80 | DLT 7000 | DLT 8000 | | | | | 14 Slots | | | | Performance (GB/hr) | | | | | | | 1 drive | | | | 2 drives | | | | 3 drives | | | | Power Specifications | Voltage | 100-120 / 200-240 VAC | Frequency | 50 / 60 Hz | Power Consumption | 100 to 260 watts (typical) | Environmental, operating | Humidity | 20% to 80%, noncondensing | Temperature | 50°F to 104°F (10°C to 40°C) | Altitude | -500 to 30,000 feet (-152.4 to 9,144m) | Environmental, non-operating (storage & shipping) | Humidity | 10% to 95%, noncondensing | Temperature | -40°F to 15°F (-40°C to 66°C) | Agency Approvals | Safety | UL1950 Listed, CSA, C22.2-No. 220 TUV-EN60950 | Emission | FCC Part 15B Class A, CE Mark Class A & B, VCCI Class 1 & 2, EN550221B, EN550821B, CISPR 22 A & B | Robotics Reliability | MTBF | 200,000 power-on hours | MSBF | 1 million mean cycles | MTTR | Less than 30 minutes | Weight | 985 lbs (447kg) plus 13.5 lbs (6.1kg) per drive | Cabinet Characteristics | Height | Rack: 7 in. (17.8cm) Tower: 18 in. (45.7cm) | Width | Rack: 17.8 in. (45.1cm) Tower: 10.5 in. (26.7cm) | Depth | Rack: 20 in. (50.8cm) Tower: 20 in. (50.8cm) | Weight | Rack: 70 lbs. (32kg) Tower: 76 lbs. (35kg) with 3 drives and 14 cartridges | 2. Assumes 2:1 data compression that may vary by data type and other variables. |