ATL P7000 Specifications Capacity (TB) | SDLT 220 | LTO | DLT 8000 | | | | | 399 slots | | | | 555 slots | | | | 679 slots | | | | 2,359 slots | | | | Performance (GB/hr) | | | | | | | 1 drive | | | | 8 drives | | | | 16 drives | | | | 64 drives | | | | Robotics Reliability | MTBF | 250,000 power-on hours | MSBF | 2 million load/unload cycles (swaps) | MTTR | Less than 30 minutes | Host Interfaces | SCSI Interface | Ultra SCSI "P" Fast & Wide 68-pin Micro D female connectors | Gigabit Ethernet | 1000BaseT, RJ-45 connectors | Fibre Channel | 100MB/sec. Multi-mode optical, SC connector One connection per eight tape drives | Library Configurations | 399 slots, up to 16 Super DLTtape, DLT8000, or LTO Ultrium drives 555 slots, up to 16 Super DLTtape, DLT8000, or LTO Ultrium drives 679 slots, up to 8 Super DLTtape, DLT8000, or LTO Ultrium drives Up to 2,359 slots or up to 64 drives with expansion option Load port: 12 slots for DLTtape, 8 slots for LTO Ultrium | Power Input | Electrical Rating | 100-240 VAC, 16A-8A, 60/50 Hz | Power Dissipation | 1,600W (16 drives, 2N power) | Heat Load | 5,460 BTU/hr | Power Cord | US NEMA 5-20P male to IEC 320 C19 female, Rated 125 VAC, 20A | Environmental, operating | Humidity | 20% to 80%, noncondensing | Temperature | 50°F to 90°F (10°C to 32°C) | Altitude | Sea level to 10,000 ft. (0 to 3,048 meters) | Environmental, non-operating (storage & shipping) | Humidity | 5% to 95%, noncondensing | Temperature | -40°F to 149°F (-40°C to 65°C) | Altitude | Sea level to 40,000 ft. (0 to 12,192 meters) | Cabinet Characteristics | Height | 75in. (191cm) | Width | 60in. (152cm) | Depth | 29in. (74cm) | Weight | 1444 lbs (655kg) plus 13.5 lbs (6.1kg) per drive | Agency Approvals | Safety | UL1950 Listed, cUL, C22.2-No. 950, NEMKO | Emission | FCC Part 15 Class A, CE Mark (89/336 EEC, 73/23 EEC), VCCI Class A, AUSTEL | 3. Assumes 2:1 data compression, which varies by data type, drive type, and other factors. |