HP StorageWorks DAT 72x6 Autoloader The HP StorageWorks DAT 72x6 tape autoloader is an ideal backup solution for small to medium companies with limited IT support or remote sites of larger companies. By reducing administrative tasks, the DAT 72x6 not only simplifies the backup process but reduces the risk of error as well. The autoloader includes a single tape drive inside an enclosure that holds six data cartridges in a removable magazine. With the ability to store up to 72 GB per DAT 72 data cartridge, the DAT 72x6 provides a quick, efficient means for reducing workload. The backup administrator simply loads the magazine with a week`s worth of data cartridges, and the autoloader takes care of backup for an entire week. The backup schedule can be customized by the backup application to suit the user`s needs. The DAT 72x6 comes with HP One-Button Disaster Recovery, providing the ability to restore the system quickly and effortlessly with the touch of a single button, eliminating the need for operating system and software CDs. Additional reliability features include HP StorageWorks Library and Tape Tools (L&TT) for troubleshooting as well as Tapealert for monitoring the drive and media. Features & benefits - Affordable: Very low media prices contribute to an exceptionally low overall cost of ownership
- Self-sufficient: Automatically does five daily backups and a cleaning cycle in a weekly schedule controlled by your backup software
- Backward-compatible: Reads and writes industry-standard DDS-3, DDS-4, and DAT 72 media
- Simple: Supports HP StorageWorks One-Button Disaster Recovery (OBDR), simply the easiest way to restore your system in the event of a disaster TapeAlert monitors both drive and media to warn of any problems; L&TT (Library and Tape Tools) is available for diagnostics and for firmware downloads
- Manageable: Comes with superior management capabilities that make it easy to install, use and support, including HP StorageWorks Library and Tape Tools for installation and diagnostics
- Dependable: Reduces the number of manual administrative tasks, and therefore the risk of error, in the backup process
- Convenient: Eliminates the need to change tapes at unsociable hours - managing your backup is reduced from a daily chore to the weekly task of changing the magazine
- Well-connected: Compatible with leading operating systems, backup software and servers
- Versatile: Comes in internal and external models to suit most environments
- Multilingual: Choice of six languages on the LCD front panel display
Technical Specifications Dimensions (HxWxD) | Physical | Internal | 3.25 x 5.75 x 8 in (8.3 x 14.6 x 20.3 cm) | | | External | 8.3 x 6.5 x 10.6 in (13.5 x 16.5 x 26.9 cm) | | Shipping | Internal | 10.9 x 12.5 x 18.5 in (27.5 x 31.5 x 46.5 cm) | | | External | 12.9 x 13.7 x 20.6 in (32.5 x 34.5 x 52 cm) | Weight | Physical | Internal | 4.8 lb (2.1 kg) | | | External | 10.56 lb (4.65 kg) | | Shipping | Internal | 11 lb (5 kg) | | | External | 17.6 lb (8.0 kg) | Capacity | Native | 216 GB | | | Compressed* | 432 GB | | | Recommended daily maximum (compressed*) | 72 GB (a single data cartridge) | | | Buffer Size | 4 MB | | Performance | Transfer Rate, Native | 3 MB/s | | Transfer Rate, Compressed* | 6 MB/s | | | Burst Transfer Rate (maximum asynchronous)
| 6 MB/s | | | Burst Transfer Rate (maximum synchronous)
| 40 MB/s | | | *NOTE: Compressed capacities and performance assumes a 2:1 data compression ratio; however, compression will vary based on the type of data being compressed and may be more or less than 2:1. | | Cartridge Swap Time | 15 seconds average | | | Load Time | 14 seconds average | | | Unload Time | 43 seconds to 98 seconds (depending on tape type and position) | | Search Speed | 50 seconds to any point on a DDS-4 data cartridge | Interface | SCSI Interface
| LVD/SE Wide Ultra SCSI-2 | | | SCSI Connector
| Internal: 68-pin wide LVDS
| | | | External: 68-pin wide HD LVDS, thumbscrew | | Termination | No terminator is required for internal model (assumes use of terminated cable). The external model requires termination with multimode terminator (included with product). | Media | Recommended media | DAT 72 | | | Backward compatibility | DDS-4 (150 meter) read-write DDS-3 (125 meter) read-write | Tape Format | Recording Method
| 4 mm helical scan | | | Recording Format | DAT 72 Format and ANSI/ISO/ECMA DDS-4 & DDS-3 | | Data Compression | Lempel-Ziv (DCLZ) | | | Error Detection/Correction | Reed-Solomon | | | Data Encoding Method
| Partial Response Maximum Likelihood (PRML) | Reliability | MTBF | 100,000 hours @ 30% duty cycle | | | Mean Swaps Before Failure
| >160,000 | | | Error Rate
| Less than 1 in 1017 | | | Error Checking | Read-after-write verification | | Power Requirements | Internal
| Autoloader: +5V DC, 0.75A; +12V DC, 2.0A (Rated) | | External | Mechanism: +5V DC, 0.6A; +12V DC, 1.6A (Rated) Combined: +5V DC, 0.8A; +12V DC, 2.2A (Peak <1 sec) 100 to 240 VAC, 50-60 Hz, auto-ranging, 0.6A | Liquid Crystal Display (LCD) | The dot matrix front panel information display provides user-friendly information on the autoloader`s operating status, potential error conditions, current cassette and magazine status. The LCD can be set to one of six different languages (English, French, German, Spanish, Portuguese, or Japanese) or numeric codes. | Certifications | CSA Certification to C22.2, No. 950 Amd 4; UL Listed to UL 1950 Amd 4; GS Mark EN60950 (IEC 950); TUV-EN 60950; CE Declaration of Conformity; C-TICK Approved (AS/NZS 3548); RRL Approved (RRL MIC No. 1996-18); Class 1 LED product (IEC 825-1)
| Environmental Specifications | Relative Humidity | Storage | 5% to 95% | | Operating | 20% to 80% | Temperature Range | Storage | -40° to 158° F (-40° to 70° C) | | Operating | 41° to 104° F (5° to 40° C) |
|