|
HP C1536A DDS Drive Based on the HP C1534A mechanism, this drive incorporates built-in hardware data compression (DDS-DC), which provides extra capacity and minimizes CPU utilization, giving excellent performance. A sustainable transfer rate of 366 KB/s means that the HP C1536A can typically store 4 GB of data on a single 90 meter cartridge in three hours. Read after write verification ensures a high level of data integrity. - Uses Digital Data Storage Data Compression (DDS-DC), industry standard data compression, giving:
- typically 366 KB/s transfer rate - typically 4GB of data on a single 90 meter cartridge - Finds any file in an average of 50 seconds using Fastsearch
- 200,000 hours mean time between failures (MTBF)
- Supports both 60m and 90m DDS and DDS Media Recognition System (MRS) cartridges
- Single-ended SCSI interface
- Format compatible with all DDS and DDS-DC format DAT drives
- Industry standard 3.5 inch form factor
- Downloadable firmware
- Connectivity configuration switches
- Customizable front panels
- Mounting kits for 5.25 inch half height form factors
- HP service and support (one year return to dealer/HP warranty).
Supported Commands - SCSI II Drive Commands Erase; Inquiry; Mode Select; Mode Sense; Read; Read Block Address; Release/Reserve Unit; Request Sense; Rewind; Send Diagnostic; Space; Test Unit Ready; Write; Write Filemarks. Optional Commands Load/Unload; Locate; Log Select/Sense; Prevent/Allow Medium Removal; Read Buffer; Read Position; Receive Diagnostic Results; Verify; Write Buffer. Performance Capacity | 2.6 GBytes (typical) 60 meter tape 1.3 GBytes (native) 90 meter tape 4.0 GBytes (typical) 2.0 GBytes (native) | Transfer rate | Sustained:366 Kbytes/s (typical) Burst: Asynch. 1.5 MB/s (max) Synch. 5.0 MB/s (max) | Search Speed | Ave. access time: 50s (90m tape) | Recording Format | ANSI/ECMA DDS-DC (DCLZ** algorithm) | Reliability | Expected MTBF: 200,000 power-on hours* | **Data Compression Lempel-Ziv is the industry standard for hardware-compressed (DDS-DC) tapes. Power Requirements +5V DC | +/-5% 0.8A typical | +12V DC | +/-10% 0.2A typical ** | Consumption | 5 Watts typical | **Reprogramming EEPROMs requires 12V DC +/- 5% Environmental Conditions Ambient temperature | | Operating | 5 to 40* ( 41 to 104**) mech and media | Non-operating | -40 to 70* (-40 to 158**) mech -40 to 45* (-40 to 113**) media | Relative Humidity | | Operating | 20% to 80% mech and media | Non-operating | 5% to 95% mech 20% to 80% media | Maximum wet-bulb temp | 26* non-condensing | *degrees Celsius **degrees Fahrenheit Physical Specifications Height: | 41mm (1.6 inch) | | 102mm (4.0 inch) | Depth: | 150mm (5.9 inch) | Media DDS Media Recognition System (MRS) compatible. Supports 60m and 90m DDS cartridge tapes. Product Certification UL Recognition to UL 1950 CSA Certification to C22.2 No 950 IEC 950 TUV-EN 60950 *Hewlett-Packard Company does not warrant that the predicted MTBF is representative of any particular unit installed for customer use. Failure rates are derived from a large database of tape drives. The actual figures will vary from unit to unit. C1536-00100 | Internal DDS-DC data compression DAT drive (typical capacity 4 GB) | C1534-90400 | 3.5-inch front panel (black), box of 40 | C1534-90600 | 3.5-inch front panel (white), box of 40 | C1534-90700 | 3.5-inch front panel (gray), box of 40 | C1534-90100 | 5.25-inch upgrade kit (gray panel), box of 8 | C1534-90300 | 5.25-inch upgrade kit (black panel), box of 8 | C1534-90500 | 5.25-inch upgrade kit (white panel), box of 8 | C1534-90501 | IBM PS/2 front panel, box of 8 |
|